| LI946 Curved Section Gravity Frame | |
|---|---|
| The Lemcol range of gravity conveyor will enable goods of variou shapes, size, and weights to be moved quickly, efficiently and safely from one operational stage to the next. Your choice of roller or wheel conveyors will depend on the nature of the articles to be moved. General goods that are heavy or less uniform in shape, or both, will require roller conveyors. Lighter and more uniform articles may well suit the use of wheel conveyor; which have the capacity to move goods quicker. Although each part of a gravity section has separate load capacities, it is important to note that the overall capacity of the section is dependent upon the combination of roller pitch, roller type and the method of support. Standard roller conveyors frames and rigid supports are supplied in a painted condition. Where adverse operating conditions exists, hot-dip galvanised frames and supports are available. Available in both straight and curved sections, the side channel is made from 2.5mm thick material, folded into a 'C' section for strenght. The cross members are made of inverted 40 x 40 x 3mm angle iron, strategically wielded into position to reinforce the section and provide a bed for the rigid support. There are standard lengths for straight sections (1500 and 3000mm) and curves (45 degree and 90 degree). 'Oval' axle holes to suit our standard Lemcol gravity rollers are punched at 37.5 mm centers for flexibility of roller pitch. Sections interlock to form a positive and secure join between frames, allowing the flexibility to add or reduce sections as required. Straight sections incorporate a bar coupler at one end and a hook coupler at the other. Curved sections have universal couplers at both ends. | |
| Width | 300mm |
| Angle | 45 degrees |
Price: $0.00