Heavy Duty Fork Extension Slippers
These fully enclosed Class 2 forklift extension slippers are designed and manufactured in Australia to temporarily extend existing fork tynes and should not be used as a permanent attachment.
In accordance with AS2359.15, fork slippers used for general usage should be no longer than 167% of the supporting tyne’s length.
If the slippers are longer than 167%, then the usage of those slippers shall be restricted to their specific application.
When using Fork Slipper Tyne Extensions, caution must be exercised to ensure that they are used only for load stabilizing purposes and that the load is uniform and fully supported by the fork tyne.
– Supplied with heel lock pins.
– Zinc plated finish.
– Maximum tyne size 130mm x 50mm
– Specification Sheet is here for all sizes
– Class 2 Heavy Duty Forklift Slippers = for use on up to a 2500kg forklift (go to Class 3 for 2.6t to 4.9t forklifts)
We also have Light duty C channel Fork Extension slippers in 1500mm and 1830mm
Be Aware:
If an attachment is fitted to the forklift then there is the potential that the dynamic and operating characteristics of the forklift will change.
Ensure you have access to information regarding the de-rated capacity of the forklift when an attachment is fitted.
Contact your forklift manufacturer or dealer for an updated rating plate to suit your attachment.
